CubeDrop
The Solo
RM 35
The simple one. A magnetic cap and room for two cubes.
130 mm tube12 mm plug2 cubes
Made to order in Cyberjaya
Magnetic speedcube cases · Cyberjaya
Your cube deserves better than a drawer.
Precision-printed magnetic cases that keep your cube safe, silent, and ready. Start with the flagship — or tell us how you carry.
Flagship
CubeVault
Our best case, engineered end to end. A lift raises your cube the moment you open it, and a drawer underneath keeps lube, spare magnets and bits within reach — no more digging through a backpack.
171 mm tubeElevator
Drawer · Standard or XL4 magnets
RM 55
Workshop · Cyberjaya
Printed and ready to ship
—
—
Print queue
—
—
The right case for you
What are you after?
Pick the one that sounds like you. We'll tell you which case fits and why.
The Cubeworks3D difference
Why Cubeworks3D
01
Engineered fits
Every case is dimensioned around real 55.5–57 mm speedcubes with 0.4 mm clearances — cubes slide in clean and never rattle.
02
Magnetic everything
6×5 mm N35 magnets in every cap and drawer. Satisfying snap-shut, no latches to break, one-handed open.
03
Direct from the maker
Designed, printed and quality-checked by a speedcuber in Cyberjaya. You order on WhatsApp, we print your case — no warehouse, no middlemen.
From Blender to your desk
How it's made
Four steps, no warehouse, no middlemen — every case passes through the same hands.
01
DesignModeled in Blender and dimensioned around real 55.5–57 mm speedcubes.
02
PrintPrinted to order on a Bambu Lab A1 in Cyberjaya — nothing sits on a shelf.
03
Finish & QAMagnets set by hand and every case test-fitted before it’s boxed.
04
ShipOut the door in 2–5 days — free across West Malaysia.
Free West MY shippingEast Malaysia just RM 5
WhatsApp supportDirect line to the maker
Made to orderPrinted & assembled in Cyberjaya
6case designs
24magnets per kit
0.40mm tolerance
100% printed in-house
What it’s made of
Materials & sustainability
PETG shell
Tougher and more UV-stable than plain PLA — built to live in a bag or glovebox for years.
Printed to order
Nothing is pre-made and shelved. Your case is printed after you order, so nothing goes to waste.
Regrind-friendly
Failed prints and support material are reground and reused in-house wherever possible.
Good questions
FAQ
Which cube sizes fit?
CubeDrop, Elecube, MagLev and CubeVault fit 55.5–57 mm 3x3 speedcubes. Cube460 is sized for 60 mm 4x4s. CubePod fits 3x3s and, with the optional adapter, 2x2s.
How long does shipping take?
Every case is printed to order, so allow 2–5 days before it ships. Shipping itself is free across West Malaysia and a flat RM 5 to East Malaysia.
How do I pay?
Checkout is handled over WhatsApp with TNG eWallet. You configure your case here, then confirm and pay directly with the maker.
Six cases, one magnet
Six cases. Pick the one that fits how you carry.
Every case uses the same magnets and the same snap-shut cap. Pick one and make it yours.
Elecube
The Lift
RM 43
Slide the knob and the cube lifts up to meet you.
140 mm tubeElevator10.8 mm plug
Made to order in Cyberjaya
CubeVault
The Kit
RM 55
The full kit. A lift for your cube, and a drawer for everything else.
171 mm tubeDrawer + elevatorFlagship
Made to order in Cyberjaya
CubePod
The Mini
RM 25
The small one. Fits a pocket, stands on a desk.
75 mm podFlat baseAdapter ready
Made to order in Cyberjaya
Cube460
The Big One
RM 35
Made for 4×4 cubes. Bigger inside, with a lift.
4×4 · 60 mmElevator + knob102 mm shell
Made to order in Cyberjaya
Configure
CubeDrop
The simple one. A magnetic cap and room for two cubes.
Who it's for
First case, backpack duty, or a gift for a cuber who just wants their cube protected without any fuss.
Care tip
Wipe the tube with a dry cloth; avoid solvents on the printed shell.
Section A–A
Shell colour
Options
- Tube height
- 130.0 mm
- Cube bore
- 61.0 mm square
- Cap plug
- 12.0 mm
- Plug clearance
- 0.40 mm
- Magnet pocket
- 6.00 × 5.2 mm
- Magnet air gap
- 0.40 mm
- Magnets
- 4 × (6×5 mm)
Cart
Your build list
Everything prints to order. Free shipping in West Malaysia — East Malaysia adds RM 5.
Nothing here yetPick a case from the catalog and configure it.
Cubeworks3D · free tools
Cuber Tools
Your practice hub — time your solves and learn the full CFOP method. Free, no sign-up, and your stats stay on your device.
⏱️
Speedcube Timer
Inspection countdown, ao5 / ao12 / ao100, scrambles, race mode and daily chests. Every solve earns cube tokens.
Open timer → 🧠Learn CFOP
Cross, F2L, OLL and PLL explained stage by stage — every algorithm plus a built-in trainer to drill them.
Start learning → 📐Fit & Specs
Check your exact cube against every case, compare sizes to scale, and see the magnet and assembly specs.
Check the fit →Watch it solve itself
A real 3×3 scrambling and unscrambling, live. Every turn is a genuine move — nothing is faked.
Measured, not estimated
Fit & specs
Every number here is measured from the actual print files — case sizes, bores and magnet counts. Check your cube fits before you order.
Will my cube fit?
Pick your cube and we'll show the clearance in every case.
Size comparison
All six cases drawn to the same scale, with a 3×3 cube for reference.
The boring but important bit
Policies & your rights
Plain English, no small print. Anything unclear — message us on WhatsApp and we'll sort it.
Returns & refunds
Faulty or damaged: if your case arrives broken, warped, or a magnet is loose, tell us within 14 days and send a photo. We'll reprint and reship it free, or refund you in full — your choice. You don't need to post the faulty one back unless we ask.
Wrong item: if we send the wrong case or colour, that's on us — we fix it at our cost.
Changed your mind
Every case is printed to order in your chosen colour, so we can't restock returns. If you've changed your mind before we start printing, message us and we'll cancel and refund in full. Once printing has started we can't refund a change of mind — but talk to us, we're reasonable.
Cancelling
Message us on WhatsApp with your order. If it hasn't hit the printer, it's cancelled and refunded, no questions.
Warranty
Every Cubeworks3D case is covered for 6 months from delivery against printing and assembly faults — layer separation, a magnet coming loose, a cap that won't hold, a drawer that binds.
What's covered: we repair or replace it free, including postage.
Not covered
- Drops, crushing, or a car dashboard in Malaysian heat (PETG softens above roughly 70 °C)
- Solvents, harsh cleaners, or dishwashers
- Normal cosmetic wear — scuffs and print lines are part of a 3D-printed object
- Cases modified after purchase
No registration needed. Your WhatsApp order thread is your proof of purchase.
Privacy
What we collect and why
Cubeworks3D is one person in Cyberjaya, not a data company. We keep as little as possible.
When you order
We receive your name, WhatsApp number and delivery address — because we can't post you a case without them. Payment goes through Touch 'n Go eWallet; we never see or store your card or banking details.
When you just browse
Your cart, saved builds, timer solves, cube tokens and settings are stored in your own browser using local storage. They stay on your device. We can't read them, and clearing your browser data erases them permanently.
What we never do
- Sell or rent your details to anyone
- Send marketing you didn't ask for
- Run advertising trackers or sell profiles
How long we keep it
Order details stay in our WhatsApp thread and records for as long as we need them for warranty and tax purposes. Ask us to delete your details and we will, once any warranty period has passed.
Your choices
Message us on WhatsApp to see what we hold about you, correct it, or have it deleted.
Contact · WhatsApp +60 18-296 7670 · Cyberjaya, Selangor, Malaysia
Free tool · for cubers
Speedcube timer
Hold the pad (or the SPACE bar) to arm it, release to start solving, then tap to stop. Every solve earns you cube tokens.
—
0.000
Hold to start · SPACE on desktop
solves0
best—
ao5—
ao12—
ao100—
mean—